Manitowoc Ice Ice Maker K00159 User Manual

K00159 ADAPTER KIT  
Installation Instructions  
1. The K00159 kit is used for installing two P-0520 ice machines on a Manitowoc S-970 or a C-970 bin.  
2. Installation (bin must be level before starting):  
A. Place adapter on bin, as shown. Using the adapter as a template, drill three 5/32” (4 mm.) holes, .500” (12.7 mm.)  
deep maximum, in the back of the bin. Warning: Do not drill through interior liner. Attach with (3) 10-24 x  
.500” screws provided.  
B. Apply foam tape to the edge of the adapter openings as shown in the (A) position. Note: It is recommended to  
RTV intersections and along front inside edge of foam tape (see drawing) to prevent water tracking.  
C. Place the ice machines on the adapter. Secure them to the adapter with the (4) machine screws provided.  
Assemble the support bracket between the two ice machines with flange on bracket flush with front of ice  
machine. Install top covers.  
D. Assemble trim panel by hooking it over the top of the support bracket flange. Fasten bottom of panel to the ice  
machines by using the (2) screws holding the bottom brackets on.  
3. Refer to ice machine installation manual for ice machine installation procedures.  
Manitowoc Ice, Inc.  
2110 South 26 Street, P.O. Box 1720, Manitowoc, WI 54221-1720 USA  
8011513  
6/2/98  
Telephone 920-682-0161, Fax - Sales: 920-683-7589, Service/Parts: 920-683-7585, Other: 920-683-7879  
 

Lenovo Laptop B560 User Manual
LG Electronics Cell Phone C800 User Manual
LG Electronics DVD Recorder LHT799 User Manual
Life Fitness Treadmill 90T User Manual
Lincoln Convection Oven 1421 000 E User Manual
Loewe Flat Panel Television Digital Recorder User Manual
Logitech Mouse V450 User Manual
Mackie Music Mixer DS3232 User Manual
Magnavox TV Converter Box TB100MW9A User Manual
Metra Electronics Car Satellite Radio System 95 7330 User Manual